Treon Industrial Node 6 old Default Configuration

Legacy documentation

This page is preserved from the previous knowledge base and describes older Treon products and manual configuration workflows. It is kept for reference and is not maintained against current Treon Connect releases.

This article shows the default configuration of the Treon Industrial Node 6 before FW 6.17Fig.: Treon Industrial Node 6 DM Model.

Timer Parameters

	Time	ON/OFF	Measurement Selection
Timer 1	1h	ON	0
Timer 2	6h	ON	1
Timer 3	24h	OFF	2 and 3
Status Interval	3h	ON	none

Measurement Parameters

Measurement ID	0	1	2	3	Default
Axis	3	3	3	x-axis	All
G-Range	4	4	4	4	4
Sample Amount	36864	36864	36864	68268	110592
Calculations	1 and 3	2 and 4	5	6	0

Calculation Parameters

CalcID	1	2	3	4	5	6	Default
Features	v-RMS, v-PEAK, v-P2P, Clipping detect	LOW FFT, Clipping detect	a-RMS, a-PEAK, a-P2P, Kurtosis, Crest, Clipping detect	HIGH FFT, Clipping detect	Raw data	Raw data	FFT, aRMS, aPEAK
Low cut-off	10	10	no filter	no filter			no filter
High cut-off	1000	1333	no filter	no filter			no filter
Decimation		9		0			1
Averages		0		9			0
Overlap %		0		0			0
Window		Hanning		Hanning			Hanning
Lines of resolution		1600		1600			2048
FFT format		Variable		Variable			Auto (no variable)

Wakeup Parameters

	Default
Feature Enable	OFF
Wake-up G-range	4G
Wake-up threshold	8
Wake-up Action Delay	30s
Wake-up Blank-time	900s
Action measurement	ON
Action Indication	OFF
Action LED	ON
Measurements to be triggered	1