Update your Treon Gateway via Configuration UI

Jan 10, 2024 · 3 minutes to read

Introduction

This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via Configuration UI.

**Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.

1 Preparation

To perform this update, you will need:

• Treon Gateway in Access Point Mode
• Update link of the correct Treon Aito Release for Gateway or Firmware file downloaded to your device

You can find the correct update link in the release notes of the corresponding software release in the Updates section.

If you have files and settings stored on your Treon Gateway that should persist after the update, please read our article on Persist Move.

In case you would like to run software on the Treon Gateway after the update process has been successful, please read our article on Update Hooks.

2 Locate software update in Configuration UI

As a first step, locate the corresponding option on the Configuration UI to update your software.

You will see the current software version that your Treon Gateway has installed. Then two different options for the update.

3 Using the firmware URL

Update with URI, same as with the other update methods. Paste it in the “Download URL” section and press “UPDATE”.

Depending on your download speed of your network, this process will take about 5 to 30 minutes.

After the successful download and installation of the update, the gateway will reboot automatically. This will take several minutes, longer than usual start-up time.

4 Using image from your device

Upload file from computer. For this to work you need to acquire the file first on your laptop. There are 2 ways

• Download the file to another Gateway with SSH and the attribute “–verify” at the end so it doesn’t apply the update
• Contact Treon Support

Select “Choose file” on the “Image from device” option and select the update file and press “UPDATE”.

Since there is no download required, this process should take less time.

After the installation of the update, the gateway will reboot automatically. This will take several minutes, longer than usual start-up time.

5 Check successful update

After the Treon Gateway has rebooted, you can check if the update was successful. Please log in to your gateway again as described in step 2 and follow the procedure to check your Treon Aito Release for Gateway version.

Treon Support

You still have questions? Our dedicated team of experts is happy to help you! Please contact Treon Support directly by e-mail.

Did you know? Treon offers Premium Support and Maintenance Packages for our customers. Get even more out of Treon and boost your sales - inquire now about features and prices!