node

Troubleshooting - Treon Sensors & Nodes

Check if the Treon sensor is connected to the gateway First method to check connection can be done with the sensor Briefly press the user button of the sensor Led will light up and then blink.

Treon Nodes & Sensors Overview

Predictive monitoring is the key to predictive maintenance. Condition monitoring helps to indicate developing faults in the machinery by identifying significant enough changes. The process critical machines - turbines, or boilers, for example, cover usually around 5% of the machines.

Update your Treon Gateway & Nodes

Welcome to the Treon Knowledgebase Update section! In this guide we show you how to update your Treon Gateway Aito software via an SSH connection.  The latest Treon Gateway Aito software release is 6.

Quick Start - Treon Node

How to get started with your Treon Node.

Update your Treon Industrial Node via SSH

This article describes the process of updating your Treon Industrial Nodes and Industrial Nodes 6to the latest firmware version via an SSH connection to your Treon Gateway. 1 Schedule the Update The update process will approximately take 2 to 5 hours for smaller networks of 10 or less Industrial Nodes, with most nodes connecting directly to the Treon Gateway.

Update your Treon Industrial Node via Device Management (DM) interface

This article describes the process of updating your Treon Industrial Nodes and Industrial Nodes 6 to the latest firmware version via Device Management (DM) interface. DM commands get, set, and execute are used for this procedure.