Introduction Using the Treon Magnetic Mount Adapter enables attaching Treon Industrial Node to uneven surfaces and without any opening for a bolt. The Treon Industrial Node will be pre-fixed by a magnet and the final installation must then be done with a suitable glue.
Introduction Using the Treon Magnetic Mount Adapter enables attaching Treon Industrial Node to uneven surfaces and without any opening for a bolt. The Treon Industrial Node will be pre-fixed by a magnet and the final installation must then be done with a suitable glue.
Introduction Using the Glue Mount Adapter enables attaching the Industrial Node to a flat surface with glue. It is possible to manually align the Industrial Node.
Installation with a Glue Mount Adapter requires a Treon Glue Mount Adapter, suitable glue, and a surface of 32 mm diameter.
Introduction Using the Glue Mount Adapter enables attaching the Industrial Node to a flat surface with glue. It is possible to manually align the Industrial Node.
Installation with a Glue Mount Adapter requires a Treon Glue Mount Adapter, suitable glue, and a surface of 32 mm diameter.
Introduction With the Treon Magnetic Glue Mount Adapter for Curved Surface, the Treon Industrial Node X can be installed on slightly curved or uneven mounting surfaces. The adapter compensates for curvature and allows the node to be correctly positioned and manually oriented before the adhesive cures.
Introduction With the Direct Glue Mounting method, the Treon Industrial Node X is attached directly to the machine surface using glue. This provides the shortest possible vibration transmission path, delivering excellent measurement quality.
Introduction It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.
Option A: Nut adapter installation with epoxy:
Minimum thread length can be less than 9 mm depending on the amount of epoxy Node alignment can be done manually
Introduction It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.
Option A: Nut adapter installation with epoxy:
Minimum thread length can be less than 9 mm depending on the amount of epoxy Node alignment can be done manually