mesh

Learning Path

Welcome to learning about the Treon product environment. In this Learning Path, we will explain how to install, set up, configure and maintain Treon products step-by-step. Introduction In the Introduction section we give an overview of Treon and the Treon environment.

Designing the Mesh Network

This article explains how to plan mesh networks with Treon products, key principles of Wirepas mesh networks and solutions to common issues. When a Treon solution is deployed, it is key to plan the mesh network before the actual on-site installation.

Activating the Mesh Network

This article explains how to test a mesh network deployment and troubleshoot common issues in deployment. Testing the Network Before you install the physical devices at the deployment site, first perform a dry-run of the system to test if the network runs.

Designing the Mesh Network

Large Data in a Mesh Network

This article shows strategies to work with raw data in a mesh network and solutions to common issues. Working with large amounts of data, that occur when transmitting burst data from the nodes to the Gateway, needs to be taken into account when planning and deploying a mesh network.

Alternative Deployments in a Mesh Network

This article introduces two alternative network deployments that solve common issues when working with large data in a mesh network. There are ways to circumvent some of the mesh network’s features that in specific cases can stand against the optimal usage of the Treon products.