Introduction Using the Glue Mount Adapter enables attaching the Industrial Node to a flat surface with glue. It is possible to manually align the Industrial Node.
Installation with a Glue Mount Adapter requires a Treon Glue Mount Adapter, suitable glue, and a surface of 32 mm diameter.
Introduction Using the Glue Mount Adapter enables attaching the Industrial Node to a flat surface with glue. It is possible to manually align the Industrial Node.
Installation with a Glue Mount Adapter requires a Treon Glue Mount Adapter, suitable glue, and a surface of 32 mm diameter.
Introduction With the Treon Magnetic Glue Mount Adapter for Curved Surface, the Treon Industrial Node X can be installed on slightly curved or uneven mounting surfaces. The adapter compensates for curvature and allows the node to be correctly positioned and manually oriented before the adhesive cures.
Selecting the right measurement profile helps ensure you get useful diagnostic data without unnecessary battery use. While the default profile works well for most deployments, machine speed and operating characteristics can significantly affect which measurements and settings provide the best results.
Introduction With the Direct Glue Mounting method, the Treon Industrial Node X is attached directly to the machine surface using glue. This provides the shortest possible vibration transmission path, delivering excellent measurement quality.
After installation, the Treon Industrial Node X needs to be turned on.
Please note that we recommend first testing the Treon Gateway and all Treon Industrial Node X sensors before actual deployment.
Introduction It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.
Option A: Nut adapter installation with epoxy:
Minimum thread length can be less than 9 mm depending on the amount of epoxy Node alignment can be done manually
Introduction It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.
Option A: Nut adapter installation with epoxy:
Minimum thread length can be less than 9 mm depending on the amount of epoxy Node alignment can be done manually