Introduction For this installation method, the Treon Industrial Node is directly attached to the machine surface. This minimizes the vibration transmission route for best measurement quality. Manual alignment of the Industrial Node is not possible with this installation method.
Introduction For this installation method, the Treon Industrial Node is directly attached to the machine surface. This minimizes the vibration transmission route for best measurement quality. Manual alignment of the Industrial Node is not possible with this installation method.
Introduction This article will provide step-by-step instructions on how to install the Treon Gateway 2 in Protective Enclosure.
Keys and parts A. Status light
B. Ethernet cable gland
Introduction With the Orientation Adapter, the Treon Industrial Node X is attached to the machine surface using a threaded mounting hole. The adapter enables manual alignment, allowing the measurement axes to be oriented as needed for the monitored equipment.
Introduction With the Treon Magnetic Glue Mount Adapter for Flat Surface, the Treon Industrial Node X is glued to the equipment while the magnet temporarily holds the sensor in place during adhesive curing.
Introduction Using the Treon Magnetic Mount Adapter enables attaching Treon Industrial Node to uneven surfaces and without any opening for a bolt. The Treon Industrial Node will be pre-fixed by a magnet and the final installation must then be done with a suitable glue.
Introduction Using the Treon Magnetic Mount Adapter enables attaching Treon Industrial Node to uneven surfaces and without any opening for a bolt. The Treon Industrial Node will be pre-fixed by a magnet and the final installation must then be done with a suitable glue.
Measurement profiles are designed to work well out of the box, but in many cases you may want to adjust them to better match your machines, operating patterns, or monitoring goals.