Welcome to learning about the Treon product environment. In this Learning Path, we will explain how to install, set up, configure and maintain Treon products step-by-step.
Introduction
In the Introduction section we give an overview of Treon and the Treon environment.
This article gives an overview over Industrial Node and Industrial Node 6 installation mehtods.
When mounting the Industrial Node and Industrial Node 6 to a monitored equipment, it is important to consider the location of the sensor and the contact between the sensor and the machine.
What’s in the box When you open the sales box, check that it contains the following:
Treon Gateway AC power adapter Documentation Here is a video showing the unboxing of the Treon Condition Monitoring Starter Kit with a Treon Gateway in Protected Enclosure and Treon Industrial Nodes 6:
What’s in the box When you open the sales box, check that it contains the following:
Treon Gateway in Protective Enclosure Documentation Here is a video showing the unboxing of the Treon Condition Monitoring Starter Kit with a Treon Gateway in Protected Enclosure and Treon Industrial Nodes 6:
This article describes how to install a Treon Industrial Node or Industrial Node 6 without an adapter directly to the machine surface via an M8 hole.
For this installation method, the Industrial Node is directly attached to the machine surface.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of the Treon Magnetic Mount Adapter.
Using the Treon Magnetic Mount Adapter enables attaching Industrial Node to uneven surfaces and without any opening for a bolt.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of the Treon Glue Mount Adapter.
Using the Glue Mount Adapter enables attaching the Industrial Node to a flat surface with glue.