The Treon Industrial Node 6 measures vibration and temperature on a machine. The behavior of the sensor can be modified by device management commands using Treon JSON DM messages. <!— add link when available —>
This article gives an overview over Industrial Node and Industrial Node 6 installation mehtods.
When mounting the Industrial Node and Industrial Node 6 to a monitored equipment, it is important to consider the location of the sensor and the contact between the sensor and the machine.
Check if the Treon sensor is connected to the gateway First method to check connection can be done with the sensor
Briefly press the user button of the sensor Led will light up and then blink.
Predictive monitoring is the key to predictive maintenance. Condition monitoring helps to indicate developing faults in the machinery by identifying significant enough changes. The process critical machines - turbines, or boilers, for example, cover usually around 5% of the machines.
How to Form DM Commands Example of a DM command:
{"Ver": "2", "Val": ["AQA="], "I": 1, "Res": [1026], "Cmd": "set", "Nid": "BROADCAST", "T": [33507, 1]}
Version Field The Version field “Ver” defines which version of the JSON specification to use.
The Treon Industrial Node measures vibration and temperature of the machine it is attached to. The behavior of the sensor can be modified by device management commands using Treon JSON DM messages.
This article describes how to install a Treon Industrial Node or Industrial Node 6 without an adapter directly to the machine surface via an M8 hole.
For this installation method, the Industrial Node is directly attached to the machine surface.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of Treon Nut Adapter, with or without epoxy.
It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of the Treon Magnetic Epoxy Mount Adapter.
Using the Magnetic Epoxy Mount Adapter enables attaching Industrial Node to uneven surfaces and without any opening for a bolt.