application

Installation Treon Industrial Node and Industrial Node 6

This article gives an overview over Industrial Node and Industrial Node 6 installation mehtods. When mounting the Industrial Node and Industrial Node 6 to a monitored equipment, it is important to consider the location of the sensor and the contact between the sensor and the machine.

Treon Gateway - Overview

This article gives an overview of all Treon Knowledgebase content related to the setup and maintenance of a Treon Gateway. Installation & Setup For the basic installation and basic setup of the Treon Gateway, please see the QuickStart Guide.

Treon Gateway Configuration

After you have successfully connected to the gateway using an SSH connection, you can configure the available parameters and settings. Differences between gwadmin and gwuser The access rights of gwadmin and gwuser are different.

Treon Gateway - System description

Quick Start Guides To learn about the hardware, the installation and basic setup of the Treon Gateway, please read our Quick Start Guide. Overview The Treon Gateway connects a mesh of sensor nodes to a cloud backend.

Installation without Adapter

This article describes how to install a Treon Industrial Node or Industrial Node 6 without an adapter directly to the machine surface via an M8 hole. For this installation method, the Industrial Node is directly attached to the machine surface.

Treon Gateway - Development Environment

The Treon Gateway provides a powerful ARM-based Linux platform (Yocto) for running edge compute applications. Developers can easily deploy and execute applications written in Python 2.7 or 3 (preloaded) Node.

Treon Gateway - Network connection

You can connect to the gateway using A browser and the gateway’s own WLAN access point An SSH connection and either the gateway’s own WLAN access point or when gateway is connected to infrastructure network via Ethernet or WLAN.

Installation with Nut Adapter

This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of Treon Nut Adapter, with or without epoxy. It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.

Installation with Magnetic Epoxy Mount Adapter

This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of the Treon Magnetic Epoxy Mount Adapter. Using the Magnetic Epoxy Mount Adapter enables attaching Industrial Node to uneven surfaces and without any opening for a bolt.

Treon Gateway - Tutorials

This chapter describes the main modules and interfaces of the Treon IoTGW application and explains how to add new functionality to it. Architecture The application consists of three main layers: