The Treon Industrial Node measures vibration and temperature of the machine or structure it is attached to. The behavior of the sensor can be modified by device management commands using Treon JSON DM messages.
This article describes the process of updating your Treon Industrial Nodes and Industrial Nodes 6 to the latest Treon Aito Release for Industrial Node via Device Management (DM) interface.
DM commands get, set, and execute are used for this procedure.
This article describes the Node Telemetry feature in Treon Aito Release 7.0 for Gateway and higher releases.
In Treon Aito Release 7.0 for Gateway and higher, it is possible to enable sending telemetry data from the nodes in the mesh network to the MQTT broker.
This article describes the Gateway Telemetry feature in Treon Aito Release 7.0 for Gateway and higher releases.
In Treon Aito Release 7.0 for Gateway and higher, it is possible to enable sending telemetry data from the Treon Gateway to your MQTT cloud.
This article describes how to update your Treon Aito Release for Gateway via DM commands.
Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.
The Treon Industrial Node 6 measures vibration and temperature of the machine or structure it is attached to. The behavior of the sensor can be modified by device management commands using Treon JSON DM messages.
How to Form DM Commands Example of a DM command:
{"Ver": "2", "Val": ["AQA="], "I": 1, "Res": [1026], "Cmd": "set", "Nid": "BROADCAST", "T": [33507, 1]}
Version Field The Version field “Ver” defines which version of the JSON specification to use.
This article describes the Node Inventory feature in Treon Aito Release 6.5 for Gateway and higher releases.
In Treon Aito Release 6.5 for Gateway and higher, it is possible to enable sending a report on the nodes currently connected to the Treon Gateway.