Introduction For this installation method, the Treon Industrial Node is directly attached to the machine surface. This minimizes the vibration transmission route for best measurement quality. Manual alignment of the Industrial Node is not possible with this installation method.
Introduction Working with large amounts of data, that occur when transmitting burst data from the nodes to the Treon Gateway, needs to be taken into account when planning and deploying a mesh network.
Introduction This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via Configuration UI.
**Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.
The Treon Industrial Node might not be connected to the Treon Gateway The first method to check that the Treon Industrial Node is connected to the Treon Gateway can be done manually on the product:
Introduction There are two alternative network deployments that solve common issues when working with large data in a mesh network.
There are ways to circumvent some of the mesh network’s features that in specific cases can stand against the optimal usage of the Treon products.