The Treon Industrial Node 6 measures vibration and temperature on a machine. The behavior of the sensor can be modified by device management commands using Treon JSON DM messages. <!— add link when available —>
This article gives an overview over Industrial Node and Industrial Node 6 installation mehtods.
When mounting the Industrial Node and Industrial Node 6 to a monitored equipment, it is important to consider the location of the sensor and the contact between the sensor and the machine.
How to Form DM Commands Example of a DM command:
{"Ver": "2", "Val": ["AQA="], "I": 1, "Res": [1026], "Cmd": "set", "Nid": "BROADCAST", "T": [33507, 1]}
Version Field The Version field “Ver” defines which version of the JSON specification to use.
This article describes how to install a Treon Industrial Node or Industrial Node 6 without an adapter directly to the machine surface via an M8 hole.
For this installation method, the Industrial Node is directly attached to the machine surface.
This article describes the procedure to change the Wirepas network parameters of your Treon devices.
Please note: This article is for Treon Gateways with a Treon Aito release version of 6.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of Treon Nut Adapter, with or without epoxy.
It is possible to install your Treon Industrial Node and Industrial Node 6 either with or without epoxy.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of the Treon Magnetic Epoxy Mount Adapter.
Using the Magnetic Epoxy Mount Adapter enables attaching Industrial Node to uneven surfaces and without any opening for a bolt.
This article describes how to install a Treon Industrial Node or Industrial Node 6 with the help of the Treon Glue Mount Adapter.
Using the Glue Mount Adapter enables attaching the Industrial Node to a flat surface with glue.