Introduction This article describes how to update your Treon Aito Release for Gateway via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
Introduction After you have successfully connected to the Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure using an SSH connection, you can configure the available advanced parameters and settings.
Notice Fragment and Vector are data types added in release 7.3. You need to update your Gateway to 7.3 or higher to enable them.
Introduction These features have been introduced to help manage Burst type data.
Introduction Working with large amounts of data, that occur when transmitting burst data from the nodes to the Treon Gateway, needs to be taken into account when planning and deploying a mesh network.
Introduction In Treon Aito Release 6.5 for Gateway and higher, it is possible to enable sending a report on the nodes currently connected to the Treon Gateway. This list contains all the Wirepas items that have been detected by the Treon Gateway within the last 210 minutes (previously 60 minutes before Treon Aito Release 7 for Gateway).
Introduction This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via Configuration UI.
**Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.
Introduction There are two alternative network deployments that solve common issues when working with large data in a mesh network.
There are ways to circumvent some of the mesh network’s features that in specific cases can stand against the optimal usage of the Treon products.