What’s in the box The sales box of the Treon Gateway and the Treon Gateway 2 contains the following:
Treon Gateway AC power adapter Documentation Here is a short video showing the unboxing of the Treon Condition Monitoring Starter Kit with a Treon Gateway in Protective Enclosure and Treon Industrial Nodes 6:
Enabling Offline Buffering To follow this guide you will need to connect to the Gateway with SSH
To turn on data buffering you must create a configuration file in /opt/iotgw/conf.d
Introduction This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via an SSH access.
**Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.
When deployed behind a firewall or in a closed network, it is important to pay attention to make sure all the features of the Treon Gateway will work correctly.
Behind a firewall, the correct ports need to be open to allow Treon Gateway services such as the connection test and the device updates to have network access.
Ethernet connection Treon Gateway & Treon Gateway 2 You can establish an ethernet connection simply by attaching an ethernet cable to the Treon Gateway (QuickStart Guide item D).
Ethernet connection Treon Gateway in Protective Enclosure For establishing an ethernet connection with the Treon Gateway in Protective Enclosure, you need to open up the enclosure to gain access.
Introduction Before and after the deployment of a mesh network, it is important to test and troubleshoot common issues in deployment.
Testing the Network Before you install the physical devices at the deployment site, first perform a dry-run of the system to test if the network runs.
Introduction If you are trying to do advanced work on the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure that cannot be done via the Configuration UI, you need to connect via an SSH connection.
The Treon Gateway cannot connect via SIM card If the Treon Gateway has a SIM card in its SIM card slot but does not connect to the network (indicated by a red status light), there are several possible root causes.
Introduction In Treon Aito Release 7.0 for Gateway and higher, it is possible to enable sending telemetry data from the Treon Gateway to your MQTT cloud.
Please also see the full JSON specification according to JSON Schema.
Introduction This article describes how to update your Treon Aito Release for Gateway via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.