Introduction This article describes the main modules and interfaces of the Treon Aito Release for Gateway application and explains how to add new functionality to it.
Architecture The application consists of three main layers:
NOTE: There is no point of changing our standard key, please DO NOT do that.
Instead, if you want to replace our maintenance connection with your own:
Copy /usr/sbin/reverse-ssh-daemon e.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
For Treon Aito Release 6.5 for Gateway When using gateway in a closed network (no internet access) ping can be disabled or the ping address can be changed to an internal address that will answer ping (ICMP), so that the green LED responds to the success/failure of the internal networking instead of being permanently red.
Introduction Before deploying a mesh network, it is important to learn about key principles of Wirepas mesh networks and solutions to common issues.
When a Treon solution is deployed, it is key to plan the mesh network before the actual on-site installation.
Introduction From Treon Aito Release 7.1 for Gateway onward, it is possible to enable sending telemetry data from the nodes in the mesh network to the MQTT broker. This can be very helpful in monitoring the deployment quality and performance of the mesh network.
Introduction The Treon Gateway can be connected to the the internet via a wired ethernet connection, Wi-Fi or a cellular (SIM) connection.
Connection priority The connection priority determines the order of connection method the Treon Gateway tries to connect in to the network.