Introduction In Treon Aito Release 7.0 for Gateway and higher, it is possible to enable sending telemetry data from the Treon Gateway to your MQTT cloud.
Please also see the full JSON specification according to JSON Schema.
Introduction This article describes how to update Treon Gateway and Treon Gateway 2 software via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
Introduction This article describes how to update your Treon Aito Release for Gateway via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
No connection via SIM card If the Treon Gateway has a SIM card in its SIM card slot but does not connect to the network (indicated by a red status light), there are several possible root causes.
Introduction After you have successfully connected to the Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure using an SSH connection, you can configure the available advanced parameters and settings.
Notice Fragment and Vector are data types added in release 7.3. You need to update your Gateway to 7.3 or higher to enable them.
Introduction These features have been introduced to help manage Burst type data.
Introduction Working with large amounts of data, that occur when transmitting burst data from the nodes to the Treon Gateway, needs to be taken into account when planning and deploying a mesh network.
Introduction Working with large amounts of data, that occur when transmitting burst data from the nodes to the Treon Gateway, needs to be taken into account when planning and deploying a mesh network.