Introduction By changing cloud adapters configuration from /opt/iotgw/conf.d by adding file with name ending with .conf you can change mqtt pub/sub topics.
This can be done with for example “nano /opt/iotgw/conf.
Introduction This article describes the main modules and interfaces of the Treon Aito Release for Gateway application and explains how to add new functionality to it.
Architecture The application consists of three main layers:
Introduction Before deploying a mesh network, it is important to learn about key principles of Wirepas mesh networks and solutions to common issues.
When a Treon solution is deployed, it is key to plan the mesh network before the actual on-site installation.
Introduction Before deploying a mesh network, it is important to learn about key principles of Wirepas mesh networks and solutions to common issues.
When a Treon solution is deployed, it is key to plan the mesh network before the actual on-site installation.
Introduction Before deploying a mesh network, it is important to learn about key principles of Wirepas mesh networks and solutions to common issues.
When a Treon solution is deployed, it is key to plan the mesh network before the actual on-site installation.
NOTE: There is no point of changing our standard key, please DO NOT do that.
Instead, if you want to replace our maintenance connection with your own:
Copy /usr/sbin/reverse-ssh-daemon e.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Enabling Debug Logs To follow this guide you will need to connect to the Gateway with SSH
In case more detailed logs are needed when troubleshooting or verifying the cloud adapters, you can enable debug logs by creating a .