Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
.left-wrap-img figure { float: left; } .right-wrap-img figure { float: right }
These articles will elaborate how the Treon Gateway updates it’s firmware and what it does to customer data and installed programs.
.left-wrap-img figure { float: left; } .right-wrap-img figure { float: right }
These articles will elaborate how the Treon Gateway updates it’s firmware and what it does to customer data and installed programs.
Wirepas 5.3 Notice Only Gateways with firmware 7.3 or higher can use Wirepas 5.3.
Wirepas 5.3 is an incremental improvement in the quality of the wirepas connection along with a few bugfixes.
Wirepas 5.3 Notice Only Gateways with firmware 7.3 or higher can use Wirepas 5.3.
Wirepas 5.3 is an incremental improvement in the quality of the wirepas connection along with a few bugfixes.
This article shows the settings in the Treon Gateway Configuration UI 1.0.0 for Treon Aito Release 6.5.2 for Gateway.
Access Point Mode To configure the Treon Gateway via the Configuration UI you need to turn the Treon Gateway into Access Point Mode and connect to it via a browser.
Introduction Material:
https://usermanual.wiki/ZTE/MF833V
The ZTE MV833V 50 Mbps Wireless Modem Mobile Broadband 4G LTE Stick provides:
• 4G LTE Unlocked GSM Carrier Desbloqueados GSM (Modem Does NOT Work on Verizon Sprint Net10 or Any CDMA Carrier).
Introduction The Passthrough Parser is a feature that forwards data from third party sensor nodes in your Wirepas ecosystem to your backend via the Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure.