Treon Gateway 2

Treon Gateway Configuration UI 2.2.7

Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.

Treon Gateway Configuration UI 2.0.14

Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.

Treon Gateway - Internal Network LAN

For Treon Aito Release 6.5 for Gateway When using gateway in a closed network (no internet access) ping can be disabled or the ping address can be changed to an internal address that will answer ping (ICMP), so that the green LED responds to the success/failure of the internal networking instead of being permanently red.

Designing the Mesh Network

Introduction Before deploying a mesh network, it is important to learn about key principles of Wirepas mesh networks and solutions to common issues. When a Treon solution is deployed, it is key to plan the mesh network before the actual on-site installation.

Node Telemetry

Introduction From Treon Aito Release 7.1 for Gateway onward, it is possible to enable sending telemetry data from the nodes in the mesh network to the MQTT broker. This can be very helpful in monitoring the deployment quality and performance of the mesh network.

Treon Gateway Connectivity Overview

Introduction The Treon Gateway can be connected to the the internet via a wired ethernet connection, Wi-Fi or a cellular (SIM) connection. Connection priority The connection priority determines the order of connection method the Treon Gateway tries to connect in to the network.

Treon Gateway Update - Persist move

Describes gateways persist_move operation

Treon Gateway - Unpacking & Installation

What’s in the box The sales box of the Treon Gateway and the Treon Gateway 2 contains the following: Treon Gateway AC power adapter Documentation Here is a short video showing the unboxing of the Treon Condition Monitoring Starter Kit with a Treon Gateway in Protective Enclosure and Treon Industrial Nodes 6:

Treon Gateway - Gateway Buffering

Please note: This feature has not been tested with all possible configurations. Please proceed with care. In case you experience any issues, please contact Treon Support. To follow this guide you will need to connect to the Gateway with SSH

Update your Treon Gateway via SSH

Introduction This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via an SSH access. **Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.