Introduction Your Treon Connect Test Kit gateway typically comes equipped with a SIM card operational in your country.
Additionally, all Treon Gateways can be connected to the the internet via Ethernet connection or Wi-Fi.
The Treon Industrial Sensor C is a wireless battery- operated sensor device for collecting condition monitoring data of industrial equipment.
When the device is powered on and provisioned, it starts automatically to measure and transmit data.
Introduction In order for the Treon Industrial Node and Treon Industrial Node 6 to connect with the Treon Gateway and show as active in Treon Connect, you first need to activate them.
The Treon Industrial Sensor C is mounted on monitored equipment by gluing it.
Sensor location It is important to consider the location of the sensor and the contact between the sensor and the equipment, when mounting it to monitored equipment.
Network connection For your Treon Gateway to be able to transmit data to your Treon Connect platform, the gateway needs to be connected to the internet.
The Treon Gateway supports the following methods for establishing an internet connection:
The Treon Connect Condition Monitoring app allows you to set up warning and alerts to warn you in case specific pre-defined conditions are met. This can be used for condition monitoring to e.
The Treon Connect Events app gives an overview of all warning and alerts. You can also see the events in the Condition app in the Trends (KPI) data timeline when the feature has been activated.
For accessing the Access management app, click the corresponding app button in the Treon Connect main menu.
It will give you access to two menus:
Users presents a list of all current users.
Wirepas 5.3 Notice Only Gateways with firmware 7.3 or higher can use Wirepas 5.3.
Wirepas 5.3 is an incremental improvement in the quality of the wirepas connection along with a few bugfixes.