Treon Industrial Node Configuration

Status Treon Industrial Node

When you click at the name of a Treon Industrial Node in the Devices list, a new tab opens.

Here you get all information connected with the device, including the online status and the uptime:

Reboot Treon Industrial Node

It is possible to remotely reboot the Treon Industrial Node from this tab. Please note that it will take several minutes until the node has rebooted and will communicate again.

Configuration Treon Industrial Node

Choosing Configurations opens a new tab where you can change the settings for this device:

You can set a name for this specific device and change its Group, if you have set up groups in the Groups management app. Otherwise the device will be in the Default group.

You can add a description of the device and set its physical location.

Get Settings

From the Configuration tab it is also possible to retrieve the complete configuration from a Treon Industrial Node on command. A command will sent to the node via the Treon Gateway to get the information.

Usually, this will take about 1-2 minutes. In cases when the mesh network communication is not ideal, or raw data is running over the mesh network, it can take substantially longer.

Next step: Group Management